Creek Don't Rise
https://creekdontrise.com/forums/

Nylon Strings for 4-string banjo
https://creekdontrise.com/forums/viewtopic.php?f=31&t=300
Page 1 of 1

Author:  paulrace [ Tue Sep 19, 2017 1:19 pm ]
Post subject:  Nylon Strings for 4-string banjo

A reader writes:

Do you know where I can buy nylon strings for a 17 fret tenor banjo?

-----------------------------------------

Not offhand but I can check around. What tuning are you interested in. Also, do you know the scale length, the distance from the nut to the bridge?

Paul

----------------------------------
The reader replies:

Thanks for the reply. The tuning is CGDA and the distance from the nut to the bridge is 20 1/4." I have nylon strings on it now but the A string broke. This is an old tenor banjo with no identification on it except for an inlaid white star by the tuning pegs.

-----------------------------------------------------

Were the rest of the strings wound?

------------------------------
The reader replies:

No, only the 4th (C) string is wound.

-------------------------------
Odd that only one string was wound. Checking around, the best I can figure is that you might try a set made for half-size guitar. Something like d'Addario ej27n. You might start out using the middle 4 strings to be on the safe side, though I think you may find them a little too loose that way for your liking. I might try using the lowest 4 strings if i thought the neck could handle it. The tone would be better. Either way would give you a baseline for further experimentation. By the way, you'll have to tie the ends manually. They don't come with loops. And buying a set will usually be cheaper than buying individual strings while you're experimenting at first. Hope this helps.- Paul

----------------------------------
The reader replies:

Paul. Thanks for the help. Much appreciated. I will try what you suggest. Bob Haas

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://phpbb.com/